only one name means protektion? www.protekdevices.com 05166.r4 9/10 page 1 05166 smdb05 - smdb24c 800 watt multi-line tvs array d escripti o n the smdbxx and smdbxxc series are mult-line transient voltage suppressor arrays that provides board level protec - ton for standard ttl and mos bus line applicatons against the damaging efects of esd, tertary lightning and switch - ing transients. the smdb series has a peak pulse power ratng of 800 wats for an 8/20s waveshape. this device series meets the iec 61000-4-2, iec 61000-4-4 and iec 61000-4-5 requirements. f eatures ? iec compatbility iec 61000-4-2 (esd): air - 15kv, contact - 8kv ? iec compatbility iec 61000-4-4 (eft): 40a - 5/50ns ? iec compatbility iec 61000-4-5 (surge): 24a, 8/20s - level 2(line- gnd) & level 3(line-line) ? 800 wats peak pulse power per line (tp = 8/20s) ? unidirectonal and bidirectonal confguratons ? available in multple voltages ranging from 5v to 24v ? protects up to four lines ? rohs compliant ? reach compliant m ec h anical c h aracteristics ? molded jedec so-8 package ? approximate weight: 70 milligrams ? lead-free pure-tin platng (annealed) ? solder refow temperature: pure-tin - sn, 100: 260-270c ? 12mm tape and reel per eia standard 481 applicati o ns ? rs-232, rs-422 & rs-423 data lines ? smart phones ? audio/video inputs ? portable electronics ? wireless network systems ? medical electronics pin c o nfigurati o ns s o -8 pac k age 1 2 4 8 3 5 6 7 1 2 4 8 3 5 6 7 unidirectional bidirectional
only one name means protektion? www.protekdevices.com 05166.r4 9/10 page 2 05166 smdb05 - smdb24c typical device c h aracteristics maximum ratings @ 25c unless o therwise specifed parameter symb o l value units operatng temperature t l -55 to 150 c storage temperature t stg -55 to 150 c peak pulse power (tp = 8/20s) - see figure 1 p pp 800 wats forward voltage @ 100ma, 300s - square wave (see note 1) v f 1.5 volts no te 1. only applies to unidirectonal devices. electrical c h aracteristics per line @ 25c unless o therwise specifed part number (note 1) device mar k ing rated stand- o ff v o ltage v wm v o lts minimum brea k d o wn v o ltage @1 m a v (br) v o lts maximum clamping v o ltage (fig. 2) @i p = 1a v c v o lts maximum clamping v o ltage (fig. 2) @8/20 s v c @ i pp maximum lea k age current @v wm i d a maximum capacitance @0v, 1m h z c p f smdb05 pda 5.0 6.0 9.8 24.6v @ 45.0a 25 880 smdb05c pdb 5.0 6.0 9.8 24.6v @ 45.0a 25 493 smdb08 pdj 8.0 8.5 13.4 25.5v @ 40.0a 10 800 smdb08c pdk 8.0 8.5 13.4 25.5v @ 40.0a 10 450 smdb12 pdc 12.0 13.3 19.0 32.9v @ 34.0a 2 440 smdb12c pdd 12.0 13.3 19.0 32.9v @ 34.0a 2 248 smdb15 pde 15.0 16.7 24.0 38.5v @ 27.0a 2 400 smdb15c pdf 15.0 16.7 24.0 38.5v @ 27.0a 2 225 smdb24 pdg 24.0 26.7 43.0 48.5v @ 20.0a 2 275 smdb24c pdh 24.0 26.7 43.0 48.5v @ 20.0a 2 155 no tes 1. part numbers with a c sufx are bidirectonal devices, i.e., smdb05 c.
only one name means protektion? www.protekdevices.com 05166.r4 9/10 page 3 05166 smdb05 - smdb24c typical device c h aracteristics figure 1 pea k pulse p o wer vs pulse time t d - pulse duraton - s 800w, 8/20s waveform 0.1 1 10 100 1,000 10,000 p pp - peak pulse current - wats 10 100 1,000 10,000 peak pulse power 8/20s average power figure 3 p o wer derating curve t a - ambient temperature - c 0 25 50 75 100 125 150 0 20 40 60 80 100 % o f rated power test waveform parameters t f = 8s t d = 20s t f e -t peak value i pp t d = t/(i pp /2) figure 2 pulse wave f o rm t - time - s 0 5 10 15 20 25 30 i pp - peak pulse current - % of i pp 0 20 40 60 80 100 120
only one name means protektion? www.protekdevices.com 05166.r4 9/10 page 4 05166 smdb05 - smdb24c s o -8 pac k age inf o rmati o n o utline dimensi o ns dim millimeters inc h es min max min max a 4.80 5.00 0.189 0.196 b 3.80 4.00 0.150 0.157 c 1.35 1.75 0.054 0.068 d 0.35 0.49 0.014 0.019 f 0.40 1.25 0.016 0.049 g 1.27 bsc 0.05 bsc j 0.18 0.25 0.007 0.009 k 0.10 0.25 0.004 0.008 p 5.80 6.20 0.229 0.244 r 0.25 0.50 0.010 0.019 n o tes 1. -t- = seatng plane and datum surface. 2. dimensions a and b are datum. 3. dimensions a and b do not include mold protrusion. 4. maximum mold protrusion is 0.015 (0.380mm) per side. 5. dimensioning and tolerances per ansi y14.5m, 1982. 6. dimensions are exclusive of mold fash and metal burrs. pad lay o ut dimensi o ns dim millimeters inc h es min max min max a 1.14 1.40 0.045 0.055 b 0.64 0.89 0.025 0.035 c 6.22 - 0.245 - d 3.94 4.17 0.155 0.165 e 1.02 1.27 0.040 0.050 n o tes 1. controlling dimension: inches. -a- 8 5 1 4 -b- p g d -t - c k j r x 45 0 - 10 f 4 pl 0.010 (0.25mm) m b + 8 pl 0.010 (0.25mm) b + a t a b c d e m m s s
only one name means protektion? www.protekdevices.com 05166.r4 9/10 page 5 05166 smdb05 - smdb24c tape and reel user directon of feed t k0 a0 p d p0 p2 e b0 f w 10 pitches cumulatve tolerance on tape 0.2 specificati o ns r eel d ia . t ape w idt h a0 b0 k 0 d e f w p0 p2 p tmax 178mm (7) 12mm 6.50 0.10 5.40 0.10 2.00 0.10 1.50 0.10 1.75 0.10 5.50 0.05 12.00 0.30 4.00 0.12 2.00 0.10 4.00 0.10 0.25 no tes 1. dimensions are in millimeters. 2. surface mount product is taped and reeled in accordance with eia-481. 3. sufx - t7 = 7 reel - 1,000 pieces per 12mm tape. 4. sufx - t13 = 13 reel - 2,500 pieces per 12mm tape. 5. bulk product shipped in tubes of 98 pieces per tube. 6. marking on part - marking code (see page 2), date code, logo and pin one defned by dot on top of package. package outline, pad layout and tape specifcatons per document number 06011.r4 8/10. o rdering inf o rmati o n base part number ( xx = v oltage ) leadfree suffix tape suffix qty/reel reel size tube qty smdbxx/smdbxxc -lf -t7 1,000 7 98 smdbxx/smdbxxc -lf -t13 2,500 13 98
only one name means protektion? www.protekdevices.com 05166.r4 9/10 page 6 05166 smdb05 - smdb24c c o mpany inf o rmati o n c o mpany pr ofile protek devices, based in tempe, arizona usa, is a manufacturer of transient voltage suppression (tvs) products designed specifcally for the protecton of electronic systems from the efects of lightning, electrostatc discharge (esd), nuclear electromagnetc pulse (nemp), in - ductve switching and emi/rfi. with over 25 years of engineering and manufacturing experience, protek designs tvs devices that provide applicaton specifc protecton solutons for all electronic equipment/systems. protek devices analog products division, also manufactures analog interface, control, rf and power management products. copyright ? protek devices 1998 - this literature is subject to all applicable copyright laws and is not for resale in any manner. specifications: protek reserves the right to change the electrical and or mechanical characteristcs described herein without notce. design changes: protek reserves the right to discontnue product lines without notce and that the fnal judgement concerning selecton and specifcatons is the buyers and that in furnishing engineering and technical assistance. protek assumes no responsibility with respect to the selecton or specifcatons of such products. protek makes no warranty, representaton or guarantee regarding the suitability of its products for any partcular purpose, nor does protek assume any liability arising out of the applicaton or use of any product or circuit and specifcally disclaims any and all liability without limitaton special, consequental or incidental damages. life support policy: protek devices products are not authorized for use in life support systems without writen consent from the factory. c o ntact us corporate h eadquarters 2929 south fair lane tempe, arizona 85282 usa by telephone general: 602-431-8101 sales: 602-414-5109 customer service: 602-414-5114 by fax general: 602-431-2288 by e-mail: sales: sales@protekdevices.com customer service: service@protekdevices.com technical support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com
|
